Designed to improve security and keep your Dental Unit Water Line safe
The heart of the Bacterminator Dental® is the unique patented BacTerminator technology, which forces the water through a highly effective disinfection chamber using electrolysis technology. In the disinfection chamber some of the already present natural salts are converted into free chlorine as hypochloric acid which disinfects 50-100 times more effectively than normal chlorine. This means it is possible with very low concentrations of free chlorine to have an extremely high disinfection rate. The BacTerminator® Dental is effective against Legionella and other microorganisms.
BacTerminator® Dental is a complete water treatment system designed especially for use in dental units.
Provides disinfection, removes calcium carbonate and filters incoming waterProtection against growth of biofilm in the unitNo use of chemicalsEliminates the risk of loss of treatment capacity and profit because of breakdown caused by dirty water or bacteriaLess service required – with removal of biofilm, particles and lime, valves and instruments last longerEliminates problems in contaminated public waterMinimises the risk of airborne and other infections for patients, dentists and their assistants because of infected waterFocus on the working environment – low noise levelPlug and play installationJust Plug & Play - No difficult maneuvers or heavy lifts
BacTerminator® Dental was developed under a pure plug and play concept. The system is installed by an authorised service engineer between the incoming water supply and the dental unit and connected to the power. The unit is then ready for use.
As the system is equipped with a pump for stable water supply to the unit, the system can be placed some distance from the unit or in its immediate vicinity as desired. BacTerminator® Dental is developed in a compact design with a very low noise level and it is thus suitable for installation in direct connection with the dental unit.
The BacTerminator® Dental can also be used as a filling station for water for dental units with installed water tank for separate filling
Capacity: 1-2 l/minuteFlow: 2.4 l/minutePressure: 2.4 bar (adjustable)Capacity filter cartridge: 1,000 l, 10° dH or every 6 monthsAlarm for: low pressure in, filter change, service, leakageH:452 mm, W:166 mm, L:430 mmRequirements for feed water:
All versions: Fresh water of drinking water quality
Filtered to: 70μS/cmChloride level: >7mg/lTemperature: 5-40°CGeneral: Pressurieed feed water (1-6 bar)Ambient temperature: 5-40°CElectrical specifications
110V/230VAC PE 200WStandby use
If you want to read more about this innovative solution, you can do so at stateofgreen.com, which also enables you to contact with the solution provider for a visit of the demonstration site